Oracle Linux Test (OLT) User Manual Guide

Bookmark and Share
Oracle Linux Test (OLT) User Manual Guide - Welcome to our blog and we hope you will enjoy it very much. Guys, what are you looking here. You can also download it below. But I think it will be better if you read the review of Oracle Linux Test (OLT) User Guide first.

Oracle Linux Test (OLT) User Manual Guide. This document details the steps to setup and execute OLT kit . The steps to setup the kit and execute the tests on your system include . Verification of Hardware Requirements . PreInstallation a.OS Configuration b.Storage Configuration ..OLT Installation and Configuration . Execution of OLT tests Single instance , RAC . Execution of OLT Destructive tests . Results Collation for Auditing. The following are the minimum requirements  Server Requirements ■ 2 Servers or more setup as a RAC cluster= ■ For 11gR2, 1 SCAN name ( with 1 SCAN IP ) for a RAC cluster. ■ On each server,  3 IP addresses per RAC node  2 public IP addresses for public and vip interfaces ( Note: The ip address of the vip interface should be in same subnet as the public interface) ; and  One private IP for the interconnect.  At least 2 network ports for interconnect and public networks ■ one dedicated network port for interconnect ■ one dedicated network port to be used for public and vip networks  Disable NUMA via the BIOS settings ( if it is provided )  For validating NAS, a dedicated network port is required. An additional IP address is required for configuring this interface.  For validating SAN, Single or multiple FC cards for the SAN.  Storage Requirements – Storage such as NAS or a SAN which can be configured for asm/asmlib or ocfs2. The following are the storage requirements for the OLT kit.
Download Oracle Linux Test (OLT) User Manual Guide

{ 0 comments... Views All / Send Comment! }

Post a Comment

Note: Only a member of this blog may post a comment.